Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Front Panel Controls
1. POWER SWITCH
The POWER switch turns the unit on and off.
5. MULTI-FUNCTION DISPLAY
This display shows the corresponding information according to each mode.
11. PROGRAM BUTTON
This button is used for storing the tracks in the Program mode.
16. FORWARD SEARCH BUTTON ( )
This button is used for searching for a particular passage in fast forward.
ENGLISH
2. COMPACT DISC DRAWER
Load a disc (full-size or 3-inch/8 cm) into your compact disc player by placing it in this drawer with the label side up. Open and close the drawer using the OPEN/ CLOSE button (3).
6. PLAY BUTTON ( )
This button is used for starting play.
12. PROGRAM/CHECK BUTTON
This button is used for checking the stored tracks.
17. BACKWARD SKIP BUTTON ( )
This button is used for replaying from the beginning of the current track or returning to a previous track.
7. PAUSE BUTTON ( )
This button is used for holding play at the start of a track or interrupting play.
13. TIME BUTTON
This button is used for checking the elapsed playing time from the beginning of current track or remaining playing time of current track or remaining playing time of disc.
3. OPEN/CLOSE BUTTON ( )
Press this button to open or close the compact disc drawer. The drawer will also close if you press the play button or push the drawer gently toward the chassis of the player; however, we recommend that you do not push the drawer.
8. STOP/CLEAR BUTTON ( )
This button is used for stopping play or clearing programmed tracks.
18. FORWARD SKIP BUTTON ( )
next track.
This button is used for moving onto the
19. HEADPHONE JACK 14. DISPLAY BUTTON
This button is used to dim the display lighting, if desired. This JACK is used for listening with headphones.
9. RANDOM PLAY BUTTON
This button is used for playing the tracks on a disc in random order.
15. BACKWARD SEARCH BUTTON (
This button is used for searching for a particular passage in fast reverse.
20. HEADPHONE VOLUME
This is used for the adjustment of the headphone listening level.
4. REMOTE SENSOR
This area receives the signal from the remote control unit. Make sure this area of the front panel is kept free from dirt or other obstructions that might prevent proper reception of the infrared signal from the remote control.
10. REPEAT BUTTON
This button is used for repeating one track or all tracks.
